Ron's RV7 Aircraft Factory


Welcome to my personal blog. This site was created as an informal description of my build progress in the construction of a Van's RV7 aircraft. A place where family/friends/builders/curiosity seekers can follow along. It is not intended to be a detailed description of every step in the building process as that would be much too time consuming. There are plenty of sites that do a great job in that arena, that is not my intention with this site. My intention is for this to be a philisophical/motivational/inspirational account of the emotional ups and downs of the life changing journey...and it will change your life. I hope this will give you an idea, through my eyes, of what its like to make this transformation. A note to other builders, I am not an expert so do not put your safety at risk by attempting anything you see on this site until you have done your own research, or send me an email so we can discuss it. Any deviations from the plans are not approved, nor endorsed by Van's Aircraft or myself. Thanks for visiting.



Monday, June 28, 2010

More Nut Plates HOBBS 217.5 hrs

Tonight was more of the same...more nut plates. I finished the right spar and am almost done with the left. After I finished drilling the countersinks I mixed up a real small batch (like a couple tablespoons) of wash primer and dabbed a q-tip in all the holes to protect the bare aluminum before riveting. Most of the rivets can be done with the squeezer, a handful in the 'wing walk' area had to be bucked because of the tight space. No problemo.
Posted by at
Labels:

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)